A choice of four units to suit your application or budget
Fit most compact tractors from 7Hp to 40Hp with 3 point linkage and PTO 540rpm
The tractor rear top link must be minimum 53 cm length (to fix the excavator).
Category 1 and 2 for 1.5 T.
For extendable arm: additional hydraulic line, Push-Pull and counterweights are required.
For the use of grapple and auger an additional hydraulic line is required. The 1.5T grapple is not compatible with the category 1 tractors.
Model shown (1200s)
- Empty weight: 300 Kg
- Total height (folded arm): 1700 mm
- Total width: 1150 mm
- Total length: 1150 mm
Arm
- Boom swing: 79° to the right / 42° to the left
- Maximum height (Unmounted): 2,000 mm
- Maximum depth (Unmounted): 1900 mm
- Maximum length (From the chassis): 2,400 mm
- Ripping strength: 1.5 T
- Strengthened arm
Drive unit
- Power take-off multiplier
- The drive shaft is not included (see options)
Hydraulics
- Hydraulic system: PTO clockwise rotation
- Hydraulic pump: 6cc gear pump
- Operating pressure: 160 bars
- Flow: 10 l/min
- Hydraulic tank capacity: 11.9 litres
- The hydraulic rams can be set to 40 cm high